พลาสติก ซีล ปะเก็น โอริง Gasket Hydraulic Seal O-ring- Ecoseal

V-Ring


            V-Ring a unique all rubber seal for rotary shafts, V-Ring® offers the perfect solution to prevent ingress of media including dirt, dust and water while retaining lubricant. Typical applications are on chemical mechanical polish or wafer dicing equipment, where it operates at a velocity up to 12 m/s / 39 ft/s.

            A flexible axial lip seal for shafts and bearings. The V-Ring® fits directly into the shaft and seals axially against a counterface e.g. shaft collar, thrust washer, roller bearing face etc. Provides reliable sealing against dust, dirt, oil, grease etc. with low friction. Available in nitrile (NBR) and fluorocarbon (FKM).

General

The V-RING is a unique all-rubber seal for rotary shafts. Developed in the 1960’s it has been used successfully by OEMs and on the replacement market worldwide in a broad range of applications. The V-Ring is the perfect seal to prevent the ingress of dirt, dust, water or combinations of these media while positively retaining grease. With its unique design and performance the V-Ring can be used with a wide range of bearing types. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.

Description and advantages

The V-Ring is normally stretched and mounted directly on the shaft, where it is held in position by the inherent tension of the rubber body. It rotates with the shaft and seals axially against a stationary counterface, perpendicular to the shaft. The counterface can be the side wall of a bearing or a washer, stamping, bearing housing or even the metal case of an oil sea. The sealing lip is flexible and applies only a relatively light contact pressure against the counter-face and yet is still sufficient to maintain the sealing function. The low contact pressure (that varies with the fitted width) allows the seal to run dry in many applications.

Design

V-Rings are available in seven standard cross-sections to meet various space and application requirements.
The cross-sections of profiles A and S increase with the shaft diameter, whilst the other types have the same cross-section for the whole diameter range.
Profile A is the most common and available for shaft diameters from 2.7 to 2020 mm, inclusive.
Profile S is wide and tapered, which provides a very firm hold on the shaft. The rings are available for shaft diameters from 4.5 to 210 mm.
Profiles L and LX have narrow axial cross sections making them suitable for compact arrangements and are often used in combination with labyrinth seals. Available for shaft diameters from 105 (135 for LX) to 2025 mm.
Profiles RME, RM and AX are heavy duty V-Rings that are designed primarily for large high speed bearing arrangements, I.E. rolling mill and papermaking machine applications. Additionally they can be used as secondary seals for heavy duty applications where the primary seal has to be protected against water and or particulate contamination. The RME, RM and AX types can be axially and radially located on the shaft with the especially designed clamping bands. Available for shaft diameters from 300 mm and up.
Larger V-Ring sizes are available as spliced seals. For more details please contact your local TSS company.

Materials

When selecting the correct rubber compound it is necessary totake the following requirements into account
• good chemical resistance
• good resistance to high and low temperatures
• good resistance to ozone and weathering
It is also necessary to consider the need for the following attributes
• high resistance to wear
• low friction
• low compression set
• good elasticity

สอบถามข้อมูลเพิ่มเติมหรือสั่งซื้อสินค้าได้ที่
บริษัท อีโคซีล จำกัด
(ผู้แทนจำหน่าย ซีลกันรั่ว ปะเก็น และพลาสติกวิศวกรรมทุกชนิดจากต่างประเทศ จำหน่ายปลีก-ส่ง พร้อมบริการหลังการขาย)
ติดตามความรู้ดีๆ อ่านง่าย แบบนี้ทุกวันได้ที่

ecosealthailand

@ecosealthailand

E-mail : ecoseal@ecosealthailand.com